BURR- G - Carbide Burr, Deburring 60 degree
These carbide burrs are available in 11 different shapes with a choice of 5 cutting styles on Metric and Imperial shanks. STANDARD CUT for general use with a chipbreaker to prevent long slivers of damaging swarf. MEDIUM STARCUT for rapid stock removal without pulling on accurate work. Suitable for hard materials. COARSE STARCUT for maximum stock removal on snagging castings, weld, etc. Suitable for steels, non-ferrous, wood and plastics. DIAMOND CUT for hard materials with a fine chipbreaker to give powdered swarf and accurate finish. ALUMINIUM CUT for aluminium and other non-ferrous materials. Particularly suitable for soft, sticky materials.
Info |
Part No |
Description |
|
In Stock |
Price |
Qty |
Add |
|||
BURR-MG2A |
3x60° Deburring Cutter Standard Cut |
|
224 |
£5.50 | ||||||
BURR-MG2B |
3x60° Deburring cutter Medium Cut |
|
146 |
£2.20 | ||||||
BURR-G2A |
3.175mm Head Diameter Standard Cut |
|
6 |
£8.83 | ||||||
BURR-MG4A |
4.70Head Diameter Standard Cut |
|
0 |
£15.55 | ||||||
BURR-G4A |
4.762mm Head Diameter Standard Cut |
|
4 |
£13.33 | ||||||
BURR-MG6A |
6.00 Head Diameter Standard Cut |
|
1 |
£17.75 | ||||||
BURR-G6A |
6.35mm Head Diameter Standard Cut |
|
2 |
£17.02 | ||||||
BURR-MG8A |
9.5x60° Deburring Cutter Standard Cut |
|
195 |
£11.00 | ||||||
BURR-MG8B |
9.5x60° Deburring cutter Medium Cut |
|
264 |
£2.20 | ||||||
BURR-G8A |
9.525 Head DiameterStandard Cut |
|
2 |
£20.30 | ||||||
BURR-MG10A |
12.70 Head Diameter Standard Cut |
|
55 |
£16.50 | ||||||
BURR-G10A |
12.7mm Head Diameter Standard Cut |
|
2 |
£25.22 | ||||||
BURR-MG12A |
15.8x60° Deburring Cutter Standard Cut |
|
95 |
£22.00 | ||||||
BURR-G12A |
15.875mm Head Diameter Standard Cut |
|
1 |
£34.72 | ||||||
BURR-MG14A |
19.00 Head Diameter Standard Cut |
|
3 |
£48.03 | ||||||
BURR-G14A |
19.05mm Head Diameter Standard Cut |
|
2 |
£47.10 |